1 the raw material
(1) cement strength. A large number of concrete formulation examples show that as the strength of cement increases, the strength of concrete will also increase, which is a positive relationship with the strength of cement. In addition, on the premise of not changing the strength grade of cement, increasing the amount of cement incorporation is beneficial to improve the strength of concrete.
(2) sand percentage. Sand ratio has great influence on the strength and mechanical properties of concrete. Generally speaking, the determination of sand quantity should be based on the requirements of the project and construction technology. In order to avoid the substantial change of concrete strength and ensure that the concrete prepared fully meets the needs of the project, the dosage of cementitious materials must be properly controlled.
(3) water-binder ratio. In the concrete preparation, the water glue ratio is too high will make the concrete in the cement and other powdery content drop, so that the gap between the powder becomes larger, thus affecting the strength of concrete. If this concrete is used in engineering, it will cause significant deformation of the building. On the contrary, when the ratio of water to glue is smaller, the spacing between cement and other powder particles is smaller, and the strength and compactness of concrete can be guaranteed.
(4) admixture. Slag powder, fly ash and other additives are commonly used mixtures at present. Reasonable application in concrete formulation can improve the hydration heat rate of concrete and optimize its performance. There are some active components in the admixture, which can positively promote the later stage of concrete and improve its strength and service life.










