The influence of polycarboxylic acid superplasticizer on construction performance and quality is shown in various aspects.
1.Adaptability of cement, adaptability of additives, treatment of bubbles, whether to add defoaming agent.
2. When the concrete arrives at the construction site, the unloading time should not be too long.The plastic loss of polycarboxylic acid admixture concrete is faster than that of na-system concrete after 2 hours, so attention should be paid to avoid the phenomenon of caking and masonry tank body.
3. Before each opening, the concrete truck should flush and drain in time.It is prohibited to mix with other series of additives, such as nene series, which is prone to abnormal accidents such as rapid solid state.After the use of polycarboxylic acid superplasticizer, the driver should give the remaining additives to the conference information department and refilled the tank with a new polycarboxylic acid superplasticizer.
4. Polycarboxylic acid superplasticizer is not suitable for storage in iron containers.Suitable for plastics, stainless steel, enamel and other materials.When using the original iron can, the inner wall should be cleaned first and then saved.
5. It cannot be mixed with other admixtures, which may cause abnormal phenomena such as rapid condensation.
6. The effect of strength improvement is better.Adding polycarboxylic acid superplasticizer can greatly improve the strength of concrete in the early stage, which is beneficial to shorten the construction period.










