Home > News > Content

Factors And Problems Affecting Slump

Jul 20, 2022

(1) aggregate gradation of concrete. As the wrapping rate of coarse aggregate and fine aggregate of the same volume of water and cement is very different, the slump of fine aggregate is far less than that of coarse aggregate concrete at the same water content. Therefore, the fluctuation of aggregate gradation will affect the slump of concrete.

(2) Water content of concrete. The influence of concrete water content change on concrete slump is obvious. Because the water content in the sand changes greatly, if the change of water content in the sand is not considered when the concrete is mixed, it will affect the slump of the concrete.

(3) the temperature of cement. The influence of cement temperature on concrete slump is often ignored by builders. Cement temperature is high, can make concrete temperature rises not only, and slump degree can because cement temperature is tall, bibulous bigger and decrescent.

(4) error of measuring scale. The weighing deviation of water scale and cement scale has great influence on concrete slump. If the weighing deviation of water scale and cement scale is unstable, slump is not easy to control.

(5) the amount of admixture. The amount of admixture has a direct effect on concrete slump. In the production process, the amount of admixture should be relatively stable to play a better role.

(6) dehydration of gypsum in cement. In the grinding process of cement, due to the rise of temperature, it is easy to cause the dehydration of dihydrous gypsum in cement into semihydrous gypsum. After water is added on cement mix coagulate, very fast with water reaction forms 2 water gesso afresh, make the fluidity of concrete drops thereby, affect concrete slump degree.

(7) adaptability of admixture and cement. There are adaptability problems between the types of concrete admixtures and cement varieties. If the adaptability of concrete admixtures and cement is not good, it will seriously affect the fluidity of concrete and cause the loss of concrete slump.

(8) the grinding fineness of cement. The fineness of cement affects the water requirement for the standard consistency of cement. In general, the greater the specific surface area of cement, the more water is required. In particular, the cement mixed with volcanic ash mixture often has a large specific surface area and high water requirement for the standard consistency of cement. Under the condition of the same water-cement ratio of concrete, the slump of concrete will be reduced. If the fineness of cement fluctuates greatly, it will cause the fluctuation of concrete slump.

(9) Abnormal cement setting time. In the process of cement clinker forging and burning, due to some reasons, the content of some fast-setting minerals in cement clinker changes, so that the setting time of cement is abnormal or fluctuates greatly (sometimes fast and sometimes slow), resulting in the slump of concrete changes greatly.


Send Inquiry
Contact Us
    • Mobile:+86 15589354098
    • Tel:+86 533 3146528
    • Email:sales@zhuoxingchem.com
    • Email:sales02@zhuoxingchem.com
    • Email:sales03@zhuoxingchem.com
    •  
    • Add: Block B, Yunlong International, Zhangdian District, Zibo City, Shandong Province, China.