Zibo Zhuoxing Enterprises Co., Ltd ,located in the Zibo City, Shandong Province,China.It is a professional and large-scale private enterprise engaged in the production of concrete additives.It is one of PCE Superplasticizer Powder suppliers in china.
We supply kinds of materials of concrete admixtures and polycarboxylate superplasticizer liquid and powder, For concrete additives,main products is polycarboxylate superplasticizer and so on.it can used in construction.
Zibo Zhuoxing Enterprises Co., Ltd
Polycarboxylate superplasticizer is an effective superplasticizer.It is also the current social water reducer.Today we would like to introduce the popularity of polycarboxylate superplasticizers.
1, with polycarboxylic acid system water-reducing agent of concrete even in the case of high slump, there will be no obvious segregation, bleeding phenomenon, concrete appearance color.In the preparation of high - grade concrete, the concrete has good workability, good adhesion and easy mixing.
2.Polycarboxylate water reducer concrete has good durability.In addition, compared with the ordinary water reducer, it has the advantages of filling, stability, pumping, strength density, sulfate erosion resistance and so on.
3. Polycarboxylate superplasticizer is an environmental protection product.The content of alkali, chloride ion, sodium sulfate and formaldehyde is very low, which will not pollute the natural environment in the production process, and is conducive to sustainable development.
4.The amount of polycarboxylic acid water reducer is small, but the water reduction rate is high, the water amount is only 1%, the water reduction rate can reach more than 35%.
5.Suitable for concrete with high content of fly ash.In the low dose range, the strength increases with the increase of the amount of admixture, but the strength does not increase with the increase of the amount of admixture.
6. 1h slump holding rate is very good.At low temperature, slump remains unchanged and expansion increases.When the temperature exceeds 20 degrees, the slump loss of 1h is slightly smaller, but it also remains at 95%℃.When the temperature exceeds 30 degrees, the slump retention value of 1h is still 93%.
