Hey there! As a supplier of Concrete Admixture Accelerator, I often get asked how these nifty little additives work. So, I thought I'd take a deep dive into the science behind them and share it with you all.
Let's start with the basics. Concrete is a mixture of cement, water, aggregates (like sand and gravel), and sometimes other additives. When water is added to cement, a chemical reaction called hydration occurs. This reaction is what makes the concrete harden and gain strength over time. But sometimes, we need the concrete to set and harden faster, especially in cold weather or when we're on a tight construction schedule. That's where concrete admixture accelerators come in.
How Do They Work?
Concrete admixture accelerators work by speeding up the hydration process of cement. They do this in a few different ways:
1. Increasing the Rate of Cement Dissolution
One of the main ways accelerators work is by increasing the rate at which cement particles dissolve in water. When cement particles dissolve, they release calcium ions and other compounds that react with water to form hydrates. By increasing the rate of dissolution, accelerators allow more of these compounds to be available for the hydration reaction, which speeds up the hardening process.
For example, some accelerators contain salts like calcium chloride. Calcium chloride dissociates in water to form calcium ions and chloride ions. The calcium ions can react with the cement particles, helping to break them down and release more calcium ions into the solution. This increases the concentration of calcium ions in the water, which in turn speeds up the formation of hydrates.
2. Promoting the Formation of Nucleation Sites
Another way accelerators work is by promoting the formation of nucleation sites. Nucleation sites are small particles or surfaces where the hydrates can start to form. By providing more nucleation sites, accelerators allow the hydrates to form more quickly and in greater numbers.
Some accelerators contain fine particles or compounds that can act as nucleation sites. For example, silica fume is a common additive that can be used as an accelerator. Silica fume particles are very small and have a high surface area, which makes them ideal for promoting the formation of nucleation sites. When silica fume is added to concrete, it provides a large number of surfaces where the hydrates can start to form, which speeds up the hardening process.
3. Reducing the Surface Tension of Water
Accelerators can also work by reducing the surface tension of water. Surface tension is the force that holds the surface of a liquid together. When the surface tension of water is reduced, it becomes easier for the water to penetrate the cement particles and react with them.
Some accelerators contain surfactants, which are compounds that can reduce the surface tension of water. Surfactants have a hydrophilic (water-loving) end and a hydrophobic (water-hating) end. When surfactants are added to water, they align themselves at the surface of the water, with the hydrophilic end facing the water and the hydrophobic end facing the air. This reduces the surface tension of the water, allowing it to penetrate the cement particles more easily.
Types of Concrete Admixture Accelerators
There are several types of concrete admixture accelerators available on the market, each with its own unique properties and applications. Some of the most common types include:
1. Calcium Chloride
Calcium chloride is one of the most widely used accelerators in the concrete industry. It is a cheap and effective way to speed up the hardening process of concrete. Calcium chloride works by increasing the rate of cement dissolution and promoting the formation of nucleation sites. However, it can also cause corrosion of steel reinforcement in concrete, so it should only be used in non-reinforced concrete or in concrete where the steel reinforcement is protected.
2. Non-Chloride Accelerators
Non-chloride accelerators are a newer type of accelerator that are designed to overcome the problems associated with calcium chloride. Non-chloride accelerators work by a variety of mechanisms, including increasing the rate of cement dissolution, promoting the formation of nucleation sites, and reducing the surface tension of water. They are generally more expensive than calcium chloride, but they are also safer to use in reinforced concrete.
3. Organic Accelerators
Organic accelerators are a type of accelerator that are made from organic compounds. They work by a variety of mechanisms, including increasing the rate of cement dissolution, promoting the formation of nucleation sites, and reducing the surface tension of water. Organic accelerators are generally more expensive than inorganic accelerators, but they are also more environmentally friendly.
Benefits of Using Concrete Admixture Accelerators
There are several benefits to using concrete admixture accelerators in your concrete projects. Some of the most important benefits include:
1. Faster Setting and Hardening
The most obvious benefit of using an accelerator is that it speeds up the setting and hardening process of concrete. This can be especially useful in cold weather or when you're on a tight construction schedule. By using an accelerator, you can reduce the time it takes for the concrete to reach its final strength, which can save you time and money.
2. Improved Early Strength
Accelerators can also improve the early strength of concrete. This means that the concrete will be able to withstand more stress and load earlier in the curing process. This can be especially useful in applications where the concrete needs to be put into service quickly, such as in pavements or bridges.
3. Reduced Shrinkage and Cracking
By speeding up the hardening process of concrete, accelerators can also reduce the amount of shrinkage and cracking that occurs during the curing process. This is because the concrete will be able to reach its final strength more quickly, which reduces the amount of time that it is subject to shrinkage and cracking forces.
4. Improved Workability
Some accelerators can also improve the workability of concrete. This means that the concrete will be easier to mix, place, and finish. By improving the workability of concrete, accelerators can make it easier for you to achieve the desired results in your concrete projects.
Applications of Concrete Admixture Accelerators
Concrete admixture accelerators are used in a variety of applications, including:


1. Cold Weather Concreting
In cold weather, the hydration process of cement slows down, which can cause the concrete to take longer to set and harden. By using an accelerator, you can speed up the hydration process and ensure that the concrete sets and hardens properly in cold weather.
2. Rapid Repair and Rehabilitation
In applications where the concrete needs to be repaired or rehabilitated quickly, such as in bridges or pavements, accelerators can be used to speed up the setting and hardening process of the repair material. This allows the repair to be completed more quickly and with less disruption to traffic.
3. Precast Concrete Production
In precast concrete production, accelerators can be used to speed up the setting and hardening process of the concrete, which allows the precast elements to be removed from the molds more quickly. This increases the production efficiency of the precast plant and reduces the cost of production.
4. Shotcrete Applications
In shotcrete applications, accelerators are used to speed up the setting and hardening process of the shotcrete, which allows it to adhere to the surface more quickly and form a strong bond. This is especially important in applications where the shotcrete is being used to repair or reinforce existing structures.
Conclusion
So, there you have it! That's how a concrete admixture accelerator works. As you can see, these additives are a powerful tool that can help you speed up the setting and hardening process of concrete, improve its early strength, reduce shrinkage and cracking, and improve its workability. If you're looking for a way to improve the performance of your concrete projects, I highly recommend considering using a concrete admixture accelerator.
If you're interested in learning more about our Concrete Admixtue Polycarboxylate Ether Superplasticizer, Superplasticizers, or Concrete Admixture Water Reducing Agent, please don't hesitate to contact us. We'd be happy to discuss your specific needs and help you find the right product for your project.
References
- Neville, A. M. (2011). Properties of Concrete. Pearson Education.
- Mindess, S., Young, J. F., & Darwin, D. (2013). Concrete: Microstructure, Properties, and Materials. Wiley.
- ACI Committee 212. (2010). Guide for Use of Chemical Admixtures in Concrete. American Concrete Institute.




