1. Evaluation of admixture sensitivity
Keep the concrete mix ratio unchanged, adjust the amount of admixture, take the initial expansion degree of concrete at (400±10)mm as the starting point, and then increase the amount. When the initial expansion degree of concrete is (550±10)mm, determine the end point of the admixture.When there are differences between the starting point and the end point of the dosage, the repeated verification test can be carried out.Admixture width = admixture end point/admixture starting point.The larger the admixture width is, the less sensitive it is.
2. Temperature sensitivity evaluation
According to the admixture sensitivity evaluation method, the admixture end point was determined as the admixture reference.Then keep the concrete mix constant, adjust the room temperature 0-5℃, in
3. Water consumption sensitivity evaluation
According to the sensitivity evaluation method of admixture, the admixture benchmark is determined, and the starting point of admixture should be chosen as the benchmark.Keep the amount of admixture and concrete mix constant, adjust the water consumption of concrete mix, increase the unit water consumption by 15kg.The difference value of concrete expansion degree under two water consumption is calculated. The smaller the difference value is, the less sensitive polycarboxylate superplasticizer is to water consumption.
4. Perceptual evaluation of raw materials
Keep unchanged concrete mixture ratio, replacement of cement, sand and other factors, according to the dosage of sensitivity evaluation test method of test, the test did not change raw material or change the raw materials of the extension, = the expansion of the change of raw materials according to the raw material sensitivity degree value - not the expansion of the change of raw materials, calculate the change of raw materials of extension and did not change the raw materials of extended degrees value, the smaller the difference, says poly carboxylic acid water reducing agent is sensitive to the less raw materials, dosage of admixture point appropriate chooses extension degree of (480 + 10) mm dosage of content as a benchmark.






