Home > Knowledge > Content

Factors affecting the quality of polycarboxylate superplasticizer

Jul 02, 2021

1.temperature,

Temperature is an external factor. When other conditions are the same, samples are heated and held at different temperatures to obtain different fluidity of product mesh slurry, which indicates that temperature has a great influence on its reaction.


2.the ratio of different raw materials

After the temperature is correct, it is quickly concluded that the water reduction of polycarboxylate superplasticizer mainly comes from macromolecular monomer. The carboxyl group, polyethylene glycol and its derivatives of macromolecular monomer have hydrophilic action. The use of macromolecular monomer is increased due to its water reduction. The fluidity of pure slurry of the sample made in this way is 240mm. The water reduction effect of macromolecular monomer in synthesis is easy to see.


3.the production process is different

According to the characteristics of organic synthesis, the products are different according to the way of drip addition, because there are more side reactions in organic reactions. Therefore, under other conditions being the same, the fluidity of the mesh slurry obtained by this process was changed by 275mm. Thus, if other things are fixed, you can consider changing the process to cut costs.


4. the addition of materials

The addition of chain transfer agent is mainly to control the large subquantity distribution of components with excessive molecular weight. Prevent the erection of Bridges. When the addition amount is too much, the molecular weight will be reduced, the water reduction effect of polycarboxylate superplasticizer will be poor, and the fluidity of reticulated-slurry will become smaller. To get better results, fine-tune the chain transfer agent to better results.


Send Inquiry